carbide inserts

>PRODUCTS
carbide inserts

1.Name:carbide inserts

2.Raw Material:tungsten carbide,carbide,coating material

3.Applicable workpiece material range:steel,stainless steel,cast iron,Heat resistant Alloy Ti alloy,Non-ferrous metal...

4.Dimention:normal/as your require

Download PDF Email this page Submit your Inquiry
Product info

carbide inserts details:


Product Dispaly

Recommended cutting parameters for carbide inserts

Workpiece material

Range of machining

Grade

Recommended cutting speed(m/min)

Steel

For finishing

YC10

130-360

For roughing

YC40

80-300

Cast iron

For finishing

YD051

100-170

For semi-finishing~

For roughing

YD201

60-130

Non-ferrous metal

For finishing

~for semi-finishing

YD101

110-1750

Heat resistant

Alloy

Ti alloy

For finishing

YD101

20-50


Grade select for carbide insert:


Coated tungsten carbide CVD

YBC251 coating

1.Golden surface of TiN can reduce friction and enable easy distinctionof the variety of wear.

2.Special structure of Al2O3 deposit layer acts as a thermal barrier and strengthens the capability of substrate

against plastic deformation under dry and high-speed cutting conditions.

3.TiCN layer acts against abrasion, which leads to the best wear resistance of the flank.

4.Thanks to the technology of gradient sintering, impact resistance of cutting edge and wear resistance are

improved which lead to improved capability of cutting edge against damage.

5.Carbide with special crystal structure improves the Red Hardness of substrate and strengthens heat resistance of

insert.


YBC151

The combination of substrate with excellent wear resistance and coating composed of MT-TiCN, thick layer of Al2O3

and TiN makes it suitable for finishing steel.

YBM151

Subst rate wi th special st ructure, i n combination with coating composed of TiCN, thin Al2O3 layer and TiN, with

excellent resistance against diffusive wear and plastic deformation makes it suitable for finishing, semi-finishing and

roughing of stainless steel.

YBC251

The substrate with good toughness and high security of cutting edge, in optimal combination with coating

composed of MT-TiCN, thick layer of Al2O3 and TiN makes it suitable for steel semifinishing

YBM251

Combination of substrate with good toughness and strength and coating composed of TiCN, thin Al2O3 layer and

TiN makes it suitable for semi-finishing and roughing of stainless steel.

YBC351

The best combination of substrate with high wear resistance and coating composed of MT-Ti (CN), thick Al2O3

layer and TiN makes it suitable for finishing and semi-finishing of cast iron materials.

YBD151

The substrate with high strength and resistance against plastic deformation, in combination with coating composed

of MT-TiCN, thick layer of Al2O3 and TiN makes it suitable for steel roughing.

YBM253

New CVD grade for high-efficiency machining of stainless steel

Widely applied in high-efficiency machining with high cutting depth and high feed rate

With advanced ultra-fine grain nano coating technology, the grade uses gradient alloy substrate with high

toughness.It demonstrates excellent capacity at cutting with high cutting depth, high feed rate and high speed.


Achieving both higher cutting speed and longer tool life

Black Diamond Inserts -Second generation of YBC

YBC152

Thick TiCN and thick Al2O3 coatings improve the impact toughness and abrasion resistance, which makes it

suitable for finishing and semi-finishing of steel at high speed. Cutting speed can increase by more than 25%, while

the tool life can increase by more than 30% at the same cutting speed

YBC252

Comprising of thick TiCN and thick Al2O3 coatings, the grade has high capability against plastic deformation

and goodhardness of cutting edge. It is preferred grade for machining of steel from finishing to roughing. Under

the same cutting conditions, the cutting speed can be increased by more than 25%, while the tool life can be

30% longer under the same cutting speed.

First choice for high-efficiency and highspeed machining of cast iron

Black Diamond Inserts YBD

The combination of thick coating and substrate with good hardness and impact resistance gives the inserts

excellent impact resistance and stability under high temperature, and improves wear resistance of inserts.

Inserts also satisfythe requirements of high speed and high feed rate when machining cast iron.

The appearance of shining full black is easily identified

YBD052

CVD coated grade, which is characterized by super fine grain and smooth surface, is the combination of hard

substrateand coating (extra thick Al2O3 + thick TiCN ). The grade is optimized for best wear resistance when

machining gray cast iron at high speed under dry condition.

YBD152

CVD coated grade, which is the combination of hard substrate and coating (medium thick Al2O3 + thick TiCN),

has good flaking resistance. It is suitable for turning of cast iron at high speed, and light intermittent cutting

can be supported even at moderate speed. It is also suitable for milling of cast iron.

YBD102

CVD coated grade, which is the combination of hard substrate and coating (thick Al2O3 + thick TiCN ), shows

excellent wear resistance and impact resistance when machining nodular cast iron at high speed.

YBD252

CVD coated grade, which is the combination of hard substrate and coating (medium thick Al2O3 + thick TiCN),

achieves the balance between wear resistance and toughness. It is suitable for wet milling of cast iron, which

requires toughness (such as nodular cast iron) at moderate or low speed. It is also suitable for intermittent turning.


Specifications
Equipment &Process

Recommended combination of grade and chipbreaker



Recommended cutting parameters:


Application areas
RELATED PRODUCTS
tungsten carbide teeth inserts

we can produce tungsten carbide teeth inserts with difference specification and size for you

More tungsten carbide teeth inserts
ceramic-carbide inserts

we can provide carbide inserts for you as your special specification

More ceramic-carbide inserts
Metal lathe cutting tools

we can provide tungsten carbide turning inserts cutting tools for you as your special specification

More Metal lathe cutting tools

Products

Contact Us

HAO Carbide Co., LTD.

Ms Becky Tsui
Tel: +86-731-22031856
Fax: +86-731-28260602
Mob: +86-13975383023
Email: catherine@haocarbide.com
Web: www.hao-drilltools.com

Office: No.628,Xinhua western Road,
Hetang District,Zhuzhou City,
Hunan province, China

haocarbide